Recommended for use in wet or dry commercial and industrial settings, the Complete Comfort II is particularly popular in healthcare facilities since it is anti-microbial treated and can be autoclave sterilized.

CONSTRUCTION
Material: High-density, closed-cell nitrile foam
Thickness: 1/2 inch (0.5")

STANDARDS & TESTING

• Passes flammability standard DOC-FF1-70
• Compression Deflection:
        50.5% at 20 psi
        63.1% at 40 psi
• ASTM C1028-96 static coefficient of friction:
       Dry 0.96
       Wet 0.82
• ESD rating of static dissipative:
       Surface to surface at 50% relative humidity 3.3 x 10^9 ohms
       Surface to surface at 12% relative humidity 3.4 x 10^9 ohms

2' x 3' (24" x 36")
3' x 4' (36" x 48")
3' x 5' (36" x 60")
4' x 6' (48" x 72")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Complete Comfort II mats can be cleaned in two different ways.

• They can be commercially laundered (see Laundering Instructions)
• Washed by hand using the following instructions:  Scrub with a deck brush (as needed) using a detergent with a neutral pH, rinse with a hose or pressure washer, and hang to dry.

Complete Comfort II mats can be commercially laundered to remove oil, grease, and soil.  The formula below does not require extensive mechanical action or drying; it is designed to dissolve grease residue by using hot water to emulsify oils and grease.  Complete Comfort mats do not require extracting or drying. 

1. Flush 2-3 minutes, high water level, cold water
2. Break 5-10 minutes, high water level, 140 degrees F (60 degrees C)
3. Rinse 2 minutes, high water level, cold water
4. Rinse 2 minutes, high water level, cold water
5. Drain 2 minutes
6. Lay mats flat following removal from washer.  Allow to cool before rolling.