Recommended for use in wet or dry industrial settings, Happy Feet mats are especially popular for use over grates thanks to their extra-sturdy construction.

SURFACE (surface encapsulates the entire cushion)
Material: Nitrile rubber

CUSHION
Material: Natural rubber
Thickness: 3/8 inch
Density: 18-20 pounds per cubic foot

OVERALL THICKNESS: 1/2 inch (0.5")

STANDARDS & TESTING

• Certified high-traction by the National Floor Safety Institute (NFSI)
• Passes flammability standard CPSC-FF1-70
• Compression Deflection:
        32.2% at 20 psi
        44.9% at 40 psi
• ASTM E303 British Pendulum Test
      Textured Surface BPN
          Dry 88
          Wet 34
      Grip Surface BPN
          Dry 105
          Wet 82
• ESD rating of electrically conductive:
      Surface to surface at 50% relative humidity 1.9 x 10^4
      Surface to surface at 12% relative humidity 2.0 x 10^4

2' x 3' (22.75" x 34.23")
3' x 5' (34.25" x 59")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Happy Feet mats can be cleaned in two different ways. They can be sterilized in an autoclave* or washed by hand using the following instructions:

1. Scrub with a deck brush (as needed) using a detergent with a neutral pH.
2. Rinse with a hose or pressure washer.
3. Hang to dry.

*Please note, autoclave sterilization is not recommended for the grip surface mat.