Recommended for use as an outdoor scraper mat or in wet areas where additional traction is needed.

CONSTRUCTION
Material: Nitrile rubber
Thickness: 3/16 inch

STANDARDS & TESTING

• Certified high-traction by the National Floor Safety Institute (NFSI)
• Passes flammability standard DOC-FF1-70
• ASTM C1028-96 static coefficient of friction:
       Dry 0.84
       Wet 0.78

2.5' x 3' (29.75" x 35")
3' x 5' (35" x 56")
3' x 10' (35" x 113.25")
4' x 6' (46" x 68.75")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

SuperScrape Plus mats can be cleaned in several different ways.

• Commercially laundered (see Laundering Instructions)
• Sterilized in an autoclave
• Washed by hand using the following instructions:  Scrub with a deck brush (as needed), using a detergent with a neutral pH.  Rinse with a hose or pressure washer.  Hang to dry.

SuperScrape Plus mats can be commercially laundered periodically to remove soil.  The formula below does not require extensive mechanical action or drying.

1. Flush 2-3 minutes, high water level, cold
2. Break 5-10 minutes, high water level, 120 degrees F (49 degrees C)
3. Rinse 2 minutes, high water level, cold
4. Rinse 2 minutes, high water level, cold
5. Drain 2 minutes
6. Rotate wash well with drain valve in open position to allow excess water to drain off mats.
7. Lay mats flat following removal from washer.  Allow to cool before rolling.