SURFACE
Material: Solution-dyed PET (polyethylene terephthalate)
Weight: 30 ounces/yard²
Construction: Needle-punched
Design: Swirl

BACKING
Material: Nitrile rubber - smooth or universal cleated
Thickness: 90-mil

OVERALL MAT THICKNESS: 3/8 inch (0.375")

STANDARDS & TESTING

• Certified high-traction by the National Floor Safety Institute (NFSI)
• Passes DOC-FF1-70 for the surface flammability of carpets

2' x 3' (23" x 35")
3' x 4' (35" x 45")
3' x 5' (35" x 58")
3' x 10' (35" x 116")
4' x 6' (45" x 71")
4' x 8' (45" x 96")
5' x 7' (58" x 83")
5' x 10' (58" x 117")
6' x 12' (70" x 143")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

WaterHog Plus mats can be cleaned in one of three ways:

• Commercially laundered (see Laundering Instructions)
• Vacuum regularly (daily in high-traffic commercial areas; weekly in lower traffic areas).
• Extract or hose off as needed to remove heavy soil/debris.  Hang mat to dry.

Always make sure the mat is dry before placing it back in service.

To commercially launder your WaterHog Plus mat, please follow the instructions below.  This formula does not require drying, however the mats can be dried if necessary.

1. Flush 2-3 minutes, high water level, 120 degrees F (49 degrees C)
2. Break 5 minutes, high water level, 120 degrees F (49 degrees C)
3. Rinse 2 minutes, high water level, 120 degrees F (49 degrees C)
4. Rinse 2 minutes, high water level, 120 degrees F (49 degrees C)
5. Extract (low speed) 2 minutes
6. Shake out (rotate wheel at wash speed with drain open) 1 minute
7. Extract (high speed max - 250 Gs) 3-5 minutes
8. Lay mats flat following removal from washer.

If you dry mats in the dryer, allow to cool before rolling.