Recommended for use in commercial and industrial settings

CONSTRUCTION
Material: High-density, closed cell nitrile rubber foam
Thickness: 3/8 inch (0.375")

STANDARDS & TESTING

• Compression Deflection:
      43.8% at 20 psi
      55.7% at 40 psi
• Certified high-traction by the National Floor Safety Institute (NFSI)
• Passes flammability standard DOC-FF1-70
• ASTM C1028-96 static coefficient of friction:
      Dry 1.00 
      Wet 0.91
• ESD rating of static dissipative:
      Surface to surface at 50% relative humidity 2.0 X 10^9 ohms 
      Surface to surface at 12% relative humidity 2.5 x 10^9 ohms
  

2' x 3' (23" x 34")
3' x 5' (34" x 56")
3' x 9' (34" x 109")
4' x 6' (42" x 68")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Comfort Scrape mats can be cleaned in several different ways.

• Commercially laundered (see Laundering Instructions)
• Sterilized in an autoclave
• Washed by hand using the following instructions:  Scrub with a deck brush (as needed), using a detergent with a neutral pH.  Rinse with a hose or pressure washer.  Hang to dry.

Comfort Scrape mats can be commercially laundered to remove oil, grease, and soil.  The formula below does not require extensive mechanical action or drying; it is designed to dissolve grease residue by using hot water to emulsify oils and grease.

1. Flush 2-3 minutes, high water level, 120 degrees F (49 degrees C)
2. Break 5-10 minutes, high water level, 140 degrees F (60 degrees C)
3. Rinse 2 minutes, high water level, 120 degrees F (49 degrees C)
4. Rinse 2 minutes, high water level, cold
5. Lay mats flat following removal from washer. Allow to cool before rolling.